Ultrasound findings and related factors of lower extremity arterial disease in patients with type 2 diabetes mellitus / 中国基层医药

Objective:To investigate the value of ultrasound findings in the diagnosis of lower extremity arterial disease in patients with type 2 diabetes mellitus and correlate it with clinical factors.Methods:A total of 535 patients with type 2 diabetes mellitus who received treatment in Taiyuan Second People's Hospital from January 2016 to June 2019 underwent color Doppler ultrasound examination (T2DM group). Vascular inner diameter, intima-media thickness, atherosclerotic plaque formation, lumen stenosis or occlusion, and hemodynamic characteristics were determined in patients with type2 diabetes mellitus compared with those in 107 patients with non-type 2 diabetes mellitus (non-T2DM group). These parameters were correlated with the course of the disease, blood glucose level, concomitant hypertension or not, and clinical Wagner grade.Results:The incidences of intima-media thickening, atherosclerotic plaque, stenosis, and occlusion of lower extremity arteries were 69.9%, 89.0%, 77.0% and 11.6% respectively, in the T2DM group, which were significantly higher than 41.1%, 78.5%, 72.0%, and 1.9% respectively in the non-T2DM group ( χ2 = 32.52, P < 0.001; χ2 = 8.76, P = 0.003; χ2 = 27.77, P < 0.001). With the prolongation of the course of T2DM, the incidence of arterial lesions in the lower extremities increased ( P < 0.001). The incidences of intima-media thickening, atherosclerotic plaque, stenosis, and occlusion of lower extremity arteries were significantly greater in the poor blood glucose control group and non-hypertension group compared with the good blood glucose control group and hypertension group (all P < 0.05). The degree of lower extremity arterial stenosis in T2DM patients was related to Wagner's grade. As the degree of stenosis increased, Wagner's grade increased correspondingly and significantly ( P < 0.001). Conclusion:Color Doppler ultrasound examination has an important value in evaluating lower extremity arterial lesions in patients with T2DM. The degree of arterial lesions in the lower extremities of T2DM patients is correlated with the course of the disease, blood glucose levels, concomitant hypertension, and clinical Wagner grade. Color Doppler ultrasound examination has an important clinical significance in evaluating the degree of vascular lesions and guiding early interventions in the clinic.

Rapid Determination of Coating Film Thickness of Tianshu Tablets by Near Infrared Spectroscopy / 中国实验方剂学杂志

<b>Objective::To investigate the feasibility of near-infrared spectroscopy for detecting the coating film thickness of Tianshu tablets. <b>Method::Nine batches of Tianshu tablets were taken during the coating process. Then, their near-infrared diffuse reflection spectra were collected. The sample set was divided into calibration set and validation set by Kennard-Stone algorithm. The preprocessing method was selected. The synergy interval partial least squares (siPLS) and moving window partial least squares (mwPLS) were employed to screen the optimal spectral interval. And the corresponding quantitative calibration model of partial least squares (PLS) were established. Some evaluation parameters were adopted to assess the performance of the model. <b>Result::The method of first derivative and Norris Derivative smoothing combined with standard normal variate transformation was suitable for processing the spectra. The optimal PLS model was established in the preferred band interval of siPLS. The correlation coefficient between the predicted value and the measured value of calibration set was 0.966, and the correlation coefficient between the predicted value and the measured value of validation set was 0.991.Both root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) values were small, which showed the fitness and predictive performance of the model were favorable. <b>Conclusion::The near-infrared spectroscopy technique can be used to determine coating film thickness of Tianshu tablets with high accuracy, which provides technical supports for the in-line determination of coating thickness in the production process of traditional Chinese medicine tablets.

Influence of pre-heating regular resin composites and flowable composites on luting ceramic veneers with different thicknesses

Abstract The aim of this study was to evaluate of pre-heating, filler contents and ceramic thickness on film thickness, microshear bond strength, degree of conversion and color change on ceramic veneers. Two experimental composites were prepared (Bis-GMA/UDMA/BisEMA/ TEGDMA), with different amounts of filler (65% or 50%wt) simulating a conventional and a flowable composite. The flowable (F) was used at room temperature and, the conventional either at room temperature (C) or pre-heated (CPH). Disk-shaped ceramics with different thickness (0.4 mm, 0.8 mm, 1.5 mm) were prepared. The film thickness was evaluated according to the ISO 4049 (n=10). The microshear bond strength (n=10) was evaluated in enamel using tubing specimens light-cured through the ceramic veneer. The degree of conversion was evaluated using Raman spectroscopy. The color change of the ceramic restorations (n=10) was evaluated by spectrophotometry. The results were submitted to 2-way ANOVA and Tukey's post hoc test (a=5%). For the film thickness 1-way ANOVA was used (a=5%). The C presented the thicker film thickness; the CPH produced a similar film thickness in comparison to the F. All composites showed similar microshear bond strength. The degree of conversion of the F was higher than the C and CPH. The degree of conversion of the composites photo-activated through a 0.4 mm was higher than the composites photo-activated through thicker ceramics. The C showed the highest color change, while the CPH showed similar color change to the F. In conclusion, pre-heated conventional composites seem to be a potential alternative to lute ceramic veneers such as the flowable composites.

Resumo O objetivo neste estudo foi avaliar a influência do pré-aquecimento, conteúdo de carga e espessura da cerâmica na espessura da película, resistência de união ao microcisalhamento, grau de conversão e alteração de cor na cimentação de cerâmicas. Dois compósitos experimentais foram preparados (Bis-GMA / UDMA / BisEMA / TEGDMA), com diferentes quantidades de carga (65% ou 50% em peso), simulando um compósito convencional e um fluido. O fluido (F) foi usado à temperatura ambiente e o convencional, à temperatura ambiente (C) ou pré-aquecido (CPH). Foram preparados discos de cerâmica com diferentes espessuras (0,4mm, 0,8mm, 1,5mm). A espessura da película foi avaliada de acordo com a ISO 4049 (n=10). A resistência de união ao microcisalhamento (n=10) foi avaliada em esmalte utilizando espécimes ​​fotopolimerizados através da cerâmica. O grau de conversão foi avaliado usando espectroscopia Raman. A alteração de cor das restaurações cerâmicas (n=10) foi avaliada por espectrofotometria. Os resultados foram submetidos à ANOVA 2- fatores e ao teste post hoc de Tukey (a=5%). Para espessura de película foi utilizada a ANOVA 1-fator (a=5%). O grupo C apresentou maior espessura de película; o CPH produziu uma espessura semelhante ao F. Todos os compósitos mostraram resistência de união ao microcisalhamento similares. O grau de conversão do F foi maior que C e CPH. O grau de conversão dos compósitos fotoativados através 0,4 mm foi maior que dos compósitos fotoativados através de cerâmicas mais espessas. O grupo C apresentou a maior mudança de cor, enquanto o CPH apresentou mudança de cor semelhante ao F. Em conclusão, compósitos convencionais pré-aquecidos assim como compósitos fluídos, parecem ser uma alternativa em potencial para cimentar laminados cerâmicos.

Effect of glass fiber post adaptation on push-out bond strength to root dentin

Abstract The aim of this study was to evaluate the effect of different glass fiber posts (GFPs) diameters on the push-out bond strength to dentin. Forty unirradicular human teeth were endodontically treated and used for cementation of GFPs (White Post DC, FGM) with different diameters (n=10): P1 - ø 1.6 mm coronal x 0.85 mm apical; P2 - ø 1.8 mm coronal x 1.05 mm apical; P5 - ø 1.4 mm coronal x 0.65 mm apical; and PC - customized post number 0.5 with composite resin (Tetric Ceram A2, Ivoclair Vivadent). All GFPs were cemented into the root canal using a dual-curing luting composite (Variolink II, Ivoclar Vivadent). One slice (1.7 mm) of each root third of cemented GFP (cervical, middle, and apical) was submitted to push-out testing. Failure modes of all specimens were classified as: adhesive failure between resin cement and post; adhesive failure between dentin and resin cement; cohesive failure within resin cement, post or dentin; and mixed failure. The data were analyzed with two-way ANOVA and Tukey's test (a=0.05). The highest bond strength values were presented for the P2 and PC groups. There was no statistically significant difference between the GFP thirds in each group. The groups P2, P5, and PC showed predominantly adhesive failure. For P1, the most prevalent type of failure was adhesive between resin cement and post. It may be concluded that a glass fiber post that is well adapted to the root canal presents higher bond strength values, regardless of GFP third.

Resumo O objetivo neste estudo foi avaliar o impacto de diferentes diâmetros de pinos de fibra de vidro (PFVs) na resistência de união à dentina. Quarenta dentes humanos unirradiculares foram tratados endodonticamente e utilizados para cimentação de PFVs (White Post DC, FGM) com diferentes diâmetros (n=10): P1 - ø 1,6 mm coronal x 0,85 mm apical; P2 - ø 1,8 mm coronal x 1,05 mm apical; P5 - ø 1,4 mm coronal x 0,65 mm apical; e PC - pino número 0,5 individualizado com resina composta (Tetric Ceram A2, Ivoclair Vivadent). Todos os PFVs foram cimentados no canal radicular usando cimento resinoso dual (Variolink II, Ivoclar Vivadent). As raízes foram seccionadas em três secções (cervical, média e apical) e submetidas ao teste push-out. Os modos de falha de todos os espécimes foram classificados em falha adesiva entre o cimento resinoso e pino, falha adesiva entre dentina e cimento resinoso, falha coesiva no cimento resinoso, pino ou dentina e falha mista. Os dados foram analisados ​​com ANOVA two-way e teste de Tukey (a=0,05). Os maiores valores de resistência da união foram apresentados para os grupos P2 e PC. Não houve diferença estatisticamente significante entre os terços dos PFVs cimentados na raiz para cada grupo. Os grupos P2, P5 e PC apresentaram predominantemente falha adesiva entre a dentina e o cimento resinoso. Para o grupo P1, o tipo de falha mais prevalente foi a adesiva entre cimento resinoso e pino. Pode-se concluir que o pino de fibra de vidro bem adaptado ao canal radicular apresentou os maiores valores de resistência da união, independentemente do terço dos PFVs.

Key Formulation Considerations of Push-Pull Osmotic Pump (PPOP) Drug Delivery System / 中国药学杂志

OBJECTIVE: Push-pull osmotic pump (PPOP) is one of conventional osmotic pump systems, which has been widely investigated for formulation development of BCS Ⅱ APIs. However, there is still a lack of experimental data based discussions for some key formulation factors of PPOP. Thus, to investigate some key formulation factors by designed experiments and tried to give some recommendations for those considerations in industrial formulation development. METHODS: Nifedipine was selected as the model drug in this study. The hydration & swell rate and strength of three grades of commercialized high molecular weight polyethylene oxide (PEO) were evaluated via swelling volume change using a home-made apparatus and via compression force using texture analyzer, respectively. The effect of different film coating thickness, proportion of osmotic agent in push layer, and ratios of push layer to pull layer were investigated by drug dissolution using USP apparatus Ⅱ as well. RESULTS: The swelling rate and strength of three grades of high molecular weight PEO (POLYOXTM 301, POLYOXTM Coagulant, and POLYOXTM 303) enhanced along with the molecular weight. The difference of swelling rate is not significant (P>0.05), but that of swelling gel strength is significant (P<0.05). Adding osmotic agent, e.g. NaCl, could significantly improve the swelling rate. Thicker coating membrane retarded drug release and as the coating thickness was higher than 180 μm, it caused incomplete drug release (<90%). When the NaCl proportion in push layer was between 10% and 30 %, there was no significant differences among drug dissolution profiles. However, when the percent of NaCl content in push layer was above 50%, the drug release from PPOP became slower and more incomplete (<90%). CONCLUSION: The ratio of DL/PL has significant impact on drug release. The lower the ratio of DL/PL resulted in faster and more complete drug release. For nifedipine case, the ratio of 2 was recommended.

Observation of tear film thickness and corneal parameters in moderate and good night wearing of orthokeratology / 国际眼科杂志(Guoji Yanke Zazhi)

@#AIM: To measure the tear film thickness when with a good fitted night wear orthokeratology lens in youth, and observe the change of corneal parameters. <p>METHODS: From July 2015 to August 2016, 51 eyes of 26 teenagers with myopia who would wear orthokeratology and accept regular follow-up were enrolled. The mean spherical equivalent refraction of teenagers was -2.78D±1.53D(-1.00D to-6.00D)before wearing orthokeratology, and the mean astigmatism was 1.29D±0.61D(0 to -2.68D). The tear film thickness were measured by optical coherence tomography(OCT)when the eyes wearing orthokeratology for 1mo. The surface regularity index(SRI)value was measured by corneal topography to compare its relationship with the tear film thickness and the changes of corneal anterior surface parameters during the period of wearing lens were observed. <p>RESULTS: At 1mo after wearing orthokeratology, the mean tear film thickness of right eyes was 230.09±10.40μm, and that was 224.38±10.57μm of left eyes. The mean tear film thickness was 228.75±9.66μm in male eyes and that was 224.80±6.74μm in female eyes. The mean tear film thickness of all eyes was 227.05±10.29μm, and the mean SRI value was 0.16±0.14. There was no correlation between tear film thickness and SRI value(<i>P</i>>0.05). The FK value, SK value and average K value from before wearing to after wearing for 2d and 1wk gradually decreased, the difference was statistically significant(<i>P</i><0.05). There was no statistical difference among wearing for 1wk, 1, 3 and 6mo(<i>P</i>>0.05). <p>CONCLUSION: OCT can be used as a safe and reliable method for measuring the thickness of the tear film space during the wearing of orthokeratology, which may be of certain value for the safety assessment of the long term wearing of orthokeratology. Orthokeratology works very quickly, corneal curvature decreases rapidly 2d after wearing and stabilizes during the period.

Evolution of lubricating adsorption films with protein aqueous solution under impact loads / 医用生物力学

Objective To study the dynamic growth of adsorption films on solid surfaces in point contacts with aqueous protein aqueous solutions and investigate the dominating factors. Methods The formation of the adsorption films within a ball-on-disc contact was measured using optical interference technique. The effects of impact loads, impact times and surface properties of the materials on the adsorption of BSA aqueous solution were also studied. Results Under dynamic conditions, the thickness of the adsorption film was much higher than that under static condition. The adsorption film was growing with increasing impact times and finally the stable thickness could be achieved. Small loads and hydrophobic materials were favorable for the growth of the adsorption film. The BSA adsorption film was easy to grow on the steel surface, but on the ceramic surface the adsorption film thickness was low. Conclusions The research about adsorbed lubricating films evolution of protein aqueous solution under impact loads is of clinical significance for treating and preventing of artificial prosthesis.

Evolution of lubricating adsorption films with protein aqueous solution under impact loads / 医用生物力学

Objective To study the dynamic growth of adsorption films on solid surfaces in point contacts with aqueous protein aqueous solutions and investigate the dominating factors.Methods The formation of the adsorption films within a ball-on-disc contact was measured using optical interference technique.The effects of impact loads,impact times and surface properties of the materials on the adsorption of BSA aqueous solution were also studied.Results Under dynamic conditions,the thickness of the adsorption film was much higher than that under static condition.The adsorption film was growing with increasing impact times and finally the stable thickness could be achieved.Small loads and hydrophobic materials were favorable for the growth of the adsorption film.The BSA adsorption film was easy to grow on the steel surface,but on the ceramic surface the adsorption film thickness was low.Conclusions The research about adsorbed lubricating films evolution of protein aqueous solution under impact loads is of clinical significance for treating and preventing of artificial prosthesis.

Measurement of Precorneal Tear Film Using Scheimpflug Camera and Relationship with Parameters for Dry Eye

PURPOSE: To compare the anterior segment parameters including precorneal tear film thickness (PTFT) using Pentacam(R) (Oculus, Wetzlar, Germany) between normal control and dry eye groups and to examine the relationships between the PTFT and other parameters for dry eye. METHODS: The present study included 23 normal controls (31 eyes) and 25 patients with dry eyes (31 eyes). We compared measurements including PTFT, corneal thickness and astigmatism using Pentacam(R) and analyzed the correlations among the PTFT and fluorescein tear break-up time (FBUT), Schirmer I test (without anesthesia), and ocular surface disease index (OSDI). RESULTS: The mean PTFT in dry eyes (21.1 +/- 2.0 microm) was significantly thinner than in normal eyes (37.6 +/- 2.0 microm; p < 0.01). In the dry eye group, the corneal thickness was thicker than in the normal eye group but there were no clinically significant differences. The dry eye group experienced more frequent and severe corneal astigmatism compared with the normal group. OSDI scores showed a weak negative correlation with objective clinical measures of dry eye (FBUT, Schirmer I test) but was not statistically significant. However, OSDI was statistically significantly negatively correlated with PTFT (r = -0.46, p < 0.01). The PTFT showed a weak positive correlation with FBUT and Schirmer I test without statistical significance. CONCLUSIONS: The mean PTFT using Pentacam(R) in the dry eye group was thinner than in the normal group. Additionally, the PTFT was correlated with subjective symptoms. Therefore, the PTFT measurement using Pentacam(R) could be considered a useful method for diagnosis and treatment of dry eye.

Effect of working time on the film thickness of dental resin cements / 대한치과보철학회지

PURPOSE: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. MATERIALS AND METHODS: The film thickness (microm) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test (alpha=.05). RESULTS: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. CONCLUSION: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of 50-microm maximum film thickness could be different from the manufacturer's recommended value.

Rheological properties of dental resin cements during polymerization / 대한치과보철학회지

PURPOSE: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. MATERIALS AND METHODS: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at 32degrees C. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan delta) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (alpha=0.05). RESULTS: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan delta was maintained at some level and reached the zero at the starting point where G' began to increase. The tan delta and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. CONCLUSION: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

Effect of film thickness of resin cement on bonding efficiency in indirect composite restoration / 대한치과보존학회지

The purpose of this study was to evaluate the effect of film thickness of various resin cements on bonding efficiency in indirect composite restoration by measurement of microtensile bond strength, polymerization shrinkage, flexural strength and modulus, fractographic FE-SEM analysis. Experimental groups were divided according to film thickness ( 0.05). 3. Panavia F showed significantly lower polymerization shrinkage than other resin cements (p < 0.05). 4. Composite-based resin cements showed significantly higher flexural strength and modulus than adhesive-based resin cements (p < 0.05). 5. FE-SEM examination showed uniform adhesive layer and well developed resin tags in composite-based resin cements but unclear adhesive layer and poorly developed resin tags in adhesive-based resin cements. In debonded surface examination, composite-based resin cements showed mixed failures but adhesive-based resin cements showed adhesive failures.

The Comparison of Viscosity-dependent Distribution of Tear Film after Dropping of Three Artificial Tears

We intended to evaluate the viscosity-dependent distribution of tear film after dropping of three artificial tears with different viscosity. We measured the corneal thickness including tear film thickness after dropping of Optagent[Povidon iodide 2%; viscosity: 1.5millimeter2/sec], Tears naturale free[hydroxypropyl methylcellulose 0.3%, dextran 0.1%;6.4 millimeter2/sec], Lacura [sodium hyaluronate 0.1%;4.6 millimeter2/sec]in 12 adult men and women without dry eye by optical beam scanning differential pachymetry of Orbscan topography. 1 minute after dropping, the thickness of 3 millimeter superior and inferior to center of cornea increased respectively 4.1 +/-0.4 micrometer, 0.4 +/-0.1micrometer[p=0.014]in Optagent, 2.4 +/-0.3 micrometer, 2.3 +/-0.2 micrometer[p=0.425]in Tears naturale free and 2.5 +/-0.5 micrometer, 2.0 +/-0.2 micrometer[p=0.126]in Lacure. 10 minute after dropping, the thickness of 3 millimeter superior and inferior to center of cornea increased respectively 2.7 +/-0.3 micrometer, 0.3 +/-0.1 micrometer[p=0.025]in Optagent, 1.7 +/-0.2 micrometer, 1.6 +/-0.2 micrometer[p=0.326]in Tears naturale free and 1.4 +/-0 .4 micrometer, 1.2 +/-0.2 micrometer[p=0.237]in Lacura. In conclusion, the artificial tears with relatively high viscosity dstributed evenly along the corneal surface after dropping, but those with relatively low viscosity distributed mainly superior to center of cornea with statistical significance. So when treating of corneal lesion in dry eye, we think that artificial tears with proper viscosity will be needed according to the location of the lesion.

The Comparison of Viscosity-dependent Distribution of Tear Film after Dropping of Three Artificial Tears

We intended to evaluate the viscosity-dependent distribution of tear film after dropping of three artificial tears with different viscosity. We measured the corneal thickness including tear film thickness after dropping of Optagent[Povidon iodide 2%; viscosity: 1.5millimeter2/sec], Tears naturale free[hydroxypropyl methylcellulose 0.3%, dextran 0.1%;6.4 millimeter2/sec], Lacura [sodium hyaluronate 0.1%;4.6 millimeter2/sec]in 12 adult men and women without dry eye by optical beam scanning differential pachymetry of Orbscan topography. 1 minute after dropping, the thickness of 3 millimeter superior and inferior to center of cornea increased respectively 4.1 +/-0.4 micrometer, 0.4 +/-0.1micrometer[p=0.014]in Optagent, 2.4 +/-0.3 micrometer, 2.3 +/-0.2 micrometer[p=0.425]in Tears naturale free and 2.5 +/-0.5 micrometer, 2.0 +/-0.2 micrometer[p=0.126]in Lacure. 10 minute after dropping, the thickness of 3 millimeter superior and inferior to center of cornea increased respectively 2.7 +/-0.3 micrometer, 0.3 +/-0.1 micrometer[p=0.025]in Optagent, 1.7 +/-0.2 micrometer, 1.6 +/-0.2 micrometer[p=0.326]in Tears naturale free and 1.4 +/-0 .4 micrometer, 1.2 +/-0.2 micrometer[p=0.237]in Lacura. In conclusion, the artificial tears with relatively high viscosity dstributed evenly along the corneal surface after dropping, but those with relatively low viscosity distributed mainly superior to center of cornea with statistical significance. So when treating of corneal lesion in dry eye, we think that artificial tears with proper viscosity will be needed according to the location of the lesion.